Steelcase turnstone Campfire Manual De Instrucciones página 4

1.
Assemble the base to
the post using three (3)
5/16-18 flat head screws (1a).
Tighten using a #3 phillips
screwdriver (1b).
2.
Start four (4) #10-24 x
1/2" adjusting screws into
the boom plate.
3.
Feed the cord into the post
until the top electrical
connector is exposed.
2
5/16-18 FLAT HEAD SCREW
1a
#10-24 X 1/2"
ADJUSTING SCREW
BOOM PLATE
BOOM WELD
ASSEMBLY
1b
POST
BASE
3
CORD
Page 4 of 30
939500548 Rev B