Steelcase turnstone Campfire Manual De Instrucciones página 8

NOTE: The Shade and
Diffuser are packaged
folded up. Their spring
steel support rings can
unfold rapidly. Hold them
out and away from you and
others as you unfold them.
9.
Unfold the shade and
confirm the slots in the
fabric are visible in the top
and bottom rings. Roll the
rings to the make the slots
visible if they are not initially
visible.
10.
Align the seam in the
shade with the notch in the
cantilever hub assembly.
11.
Snap the top ring of
the shade to the cantilevers
at four locations.
SEAM OF SHADE
ALIGNED WITH
THE NOTCH IN
CANTILEVER
HUB ASSEMBLY
9
NOTCH IN
CANTILEVER
HUB ASSEMBLY
10
SLOT
SHADE
TOP RING
BOTTOM
RING
11b
TOP RING
11a
CANTILEVER
Page 8 of 30
939500548 Rev B