Safety Instructions; Emergency Information; Putting Into Operation - Binzel ABICUT 25K Instructivo De Servicio

Antorcha de corte por plasma
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ABICUT 25K/45/75

2 Safety Instructions

2.1 Classification

2.2 Emergency information

3 Putting into operation

Please observe the attached document Safety Instructions.
The warning signs used in the operating instructions are divided into four
different levels and are shown prior to specific work steps. Arranged in
descending order of importance, they have the following meaning:
DANGER
Describes imminent threatening danger. If not avoided, it will result in fatal or
extremely critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, it may result in
serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, it may result in slight
or minor injuries.
NOTE
Describes the risk of impairing work results or the risk that the work may
result in material damage to the equipment.
In case of emergency, immediately interrupt the power and shielding gas
supplies. Further measures can be found in the "Power supply" operating
instructions or in the documentation of further peripheral devices.
DANGER
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair
work, the following instructions must be adhered to:
• Close off the power supply and cut off the gas supply.
• Disconnect the mains plug.
2 Safety Instructions
EN - 5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Abicut 45Abicut 75

Tabla de contenido