Siemens SINVERT PVM10 Instrucciones De Servicio Resumidas página 133

5.2 Selecting the country setting
The country setting determines the country-specific line monitoring parameters.
● Selection of the country settings automatically sets the menu language.
The menu language is then freely selectable at any time regardless of the country setting.
● No country setting is selected when the device is delivered.
NOTICE
Once set, the country setting can be changed by service personnel only!
After selecting and accepting the country setting, you can change it yourself only within the first 40 operating hours. In
accordance with regulations, the country setting can then only be changed by service personnel.
NOTICE
Withdrawal of operating permit if incorrect country setting is used
If you operate SINVERT PVM with an incorrect country setting, the electrical utility can withdraw your operating permit.
Selecting the country setting
1. Immediately after switching on the DC power, a window
appears on the display and prompts you to select the country
setting.
2. Select the country setting for site with the " " and " " keys and confirm with "ENTER"
3. Confirmation of acceptance of the country setting
5.3 Activating WebMonitor
You need the activation code supplied with the device and printed on the rating plate to be able to monitor the inverter via
the "SINVERT WebMonitor" web portal.
● The activation code is used to assign the SINVERT PVM inverter to the SINVERT WebMonitor web portal.
● The activation code is not required for commissioning the inverter.
● We recommend that you set up the WebMonitor as soon as possible after starting operation to avoid a later transfer of
larger volumes of operating data.
Additional documentation
Detailed PVM Operating Instructions, and WebMonitor Operating Instructions (SINVERT support
(http://www.siemens.com/sinvert-support)).
SINVERT PVM
A5E02758224B/007, 01/2013
Belgie
Česko
Deutschland ENS
Deutschland NSR
Deutschland MSR
España
France
Accept ?
Yes = Enter
= Esc
No
25