Specifications - Behringer X-UF Manual De Instrucciones

12
X-UF Interface Operation Guide
3. Configuring the PC to Interface
with the X-UF Option Card
Windows:
There is an ASIO high-performance
driver available for download,
which is essential for low-latency audio
on Windows-based applications.
Mac OS:
The X-UF is CoreAudio compatible and thus
works with low-latency on Mac computers
without any additional driver installation.

4. Specifications

Expansion Card Features:
Interface
IEEE1394/FireWire
High Speed USB 2.0
DAW remote control
Expansion Card Performance Modes (Channels):
Interface
IEEE1394/FireWire
High Speed USB 2.0
* depends on system performance and application
Recommended Minimum Hardware:
Windows-based - Core 2 Duo CPU, 2 GHz
application - USB 2.0 or IEEE1394 FireWire 400 port
- 1 GB RAM
Mac - 1.5 GHz CPU
- USB 2.0 or IEEE1394 FireWire 400 port
- 512 MB RAM
Recommended Operating Systems:
Windows: Windows XP 32-Bit SP2 or higher, Windows 7 32-bit, Windows 7 64-bit
(X-UF ASIO drivers supplied)
Mac OS X : 10.5 Leopard, 10.6 Snow Leopard, 10.7 Lion
(CoreAudio compatible)
MIDI
1 in x 1 out
1 in x 1 out
Generic MIDI, HUI or Mackie Control emulation (via USB or FireWire)
ASIO Driver for Windows-based Applications
Driver Control Panels
Once the driver is installed, you can open the control panel by
double-clicking on the small tray icon. These screens will allow
configuring the X-UF expansion card in the X32 as an audio
interface for your computer.
Audio input channels
24-Bit, 44.1/48 kHz
32, 16 or 8
32, 16 or 8
Minimum round-trip latency
<7 ms*
<12 ms*
Audio output channels
24-Bit, 44.1/48 kHz
32, 16 or 8
32, 16 or 8