Extended Throttle Lever - Invacare Scooter Lynx/Panther Series
Assembly, Installation and Operating Instructions
SAVE THESE INSTRUCTIONS
NOTE: Check all parts for shipping damage. In case of
damage, DO NOT use. Contact Carrier/Invacare for fur-
ther instructions.
SAFETY SUMMARY
The following recommendations are made for the
safe and proper installation and use of the Extended
Throttle Lever:
GENERAL WARNINGS
DO NOT install this equipment without first
reading and understanding this instruction
sheet. If you are unable to understand
the Warnings, Cautions and Instructions,
contact a healthcare professional, dealer
or technical personnel if applicable, be-
fore attempting to install this equipment -
otherwise, injury or damage may occur.
INSTALLATION WARNINGS
After ANY adjustments, repair or service and BE-
FORE use, make sure that all attaching hardware
is tightened securely.
Throttle
REVERSE
FIGURE 1 - INSTALLING THE EXTENDED THROTTLE LEVER
Locknuts
Black
This kit includes the following:
DESCRIPTION
Throttle Lever Extensions
Mounting Screws
Locknuts
INSTALLING THE EXTENDED
THROTTLE LEVER (FIGURE 1)
1. Align the throttle lever extensions to the existing throttle
lever as shown in FIGURE 1.
2. Install the two (2) screws through throttle extension
and existing lever.
3. Secure with locknuts.
4. Repeat steps 1-3 for the other throttle extension and
existing lever.
Locknuts
Throttle
Lever
1
QUANTITY
2
4
4
FORWARD
Red
Mounting
Screws
Throttle Lever
Extensions
Mounting
Screws