Picture Frames - Inserting Or Changing The Battery; Connecting The Power Supply - Rollei Pissarro DPF-82 Manual Del Usuario

6.2 Picture frames – Inserting or changing the battery
20
• Open the battery compartment (see illustration).
• Insert a type CR2032 button cell battery, observing polarity.
• Remove the contact breaker strip from the battery if present.
• Close the battery compartment. Make sure that the
cover closes easily and tightly.
6.3 Remote control
• Open the battery compartment of the remote control
(Fig. B)
• Insert a type CR2032 button cell battery, observing polarity.
• Remove the contact breaker strip from the battery if present.
• Close the battery compartment. Make sure that the cover
closes easily and tightly.

6.4 Connecting the power supply

Warning
• Only connect the product to a socket that has been
approved for the device. The socket must be installed
close to the product and easily accessible.
• Do not continue to operate the device if it becomes visibly damaged. (This is mandatory for all products with
220V mains connections.)
Note:
• The power supply unit is suitable for mains voltages of 100-240 V and therefore can be used worldwide. Please
note that a country-specific adapter may be necessary.
• Connect the enclosed power supply unit to a properly installed socket.
• Then connect the lead of the power supply unit to the DC In of the device.
7. Operation
• After connecting to the power supply. The product turns on automatically.
• Select your desired menu language by using the cursor buttons
• Press the button on the device or on the remote control to turn the device on or off.
• The device is starting up and afterwards the main menu will be displayed.
• Depending on configuration, image playback will commence.
Note:
• The files from the most recently selected storage medium will be selected automatically. If this storage medium is
no longer plugged in, the files in the internal storage will be displayed.
• Ensure that the desired storage medium is correctly connected to the device and contains data in supported file
formats. Otherwise the main menu will open for a few selection.
• After 30 minutes in the main menu without any input, the device will automatically begint to display a slide show.
/ and confirm your selection by pressing
1
2
Fig. B
2
1
.