Whirlpool WRF560SMHZ Manual De Instrucciones Para El Usuario página 14

■ If the temperature is too warm or too cold in the refrigerator
or freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
Control Panel
Depending on your model, your refrigerator has either an internal
control panel, located at the top of the refrigerator compartment,
or an external control panel, located above the external water
dispenser. Follow the instructions specific to your model.
Internal Control Panel
External Control Panel
IMPORTANT (External Control only): The display screen on the
dispenser control panel will turn off automatically and enter "sleep"
mode when the control buttons and dispenser paddles have not
been used for 2 minutes or more. While in "sleep" mode, the first
press of a control button will only reactivate the display screen,
without changing any settings. After reactivation, changes to
any settings can then be made. If no changes are made within
2 minutes, the display will re-enter "sleep" mode.
■
Touch any control button on the dispenser panel to activate
the display screen.
Temperature Control
For your convenience, the temperature control is preset at
the factory. When you first install your refrigerator, make sure
the control is still set to the recommended setting as shown.
14
Recommended Setting "3 Snowflakes"
Adjusting the Controls
If you need to adjust the temperature in either the refrigerator
or freezer compartment, use the settings listed in the following
chart as a guide.
■
Press the TEMP button to display the desired number of
snowflakes from 1 snowflake (least cold) to all 5 snowflakes
(coldest).
NOTE: Except when starting the refrigerator, do not adjust the
control more than one setting at a time. Wait 24 hours between
adjustments for the temperature to stabilize.
CONDITION/REASON:
REFRIGERATOR too warm
FREEZER too warm/too little ice
REFRIGERATOR too cold
FREEZER too cold
Cooling On/Off
Your refrigerator and freezer will not cool when cooling
is turned off. Follow the directions specific to your model.
Internal Control Panel
■ To turn cooling off, press and hold both the FAST COOL
and MOISTURE CONTROL buttons at the same time for
3 seconds. When cooling is off, "Cooling Off" will appear
on the display screen.
■
To turn cooling back on, press and hold both the
FAST COOL and MOISTURE CONTROL buttons
at the same time for 3 seconds. When cooling is
ON, "Cooling Off" will disappear and the previously
selected settings will appear on the display screen.
External Control Panel
■ To turn cooling off, press and hold both the FREEZER TEMP
and FRIDGE TEMP buttons at the same time for 3 seconds.
When cooling is OFF, "Cooling Off" will appear on the
display screen.
ADJUSTMENT:
FRIDGE TEMP
one more snowflake
FREEZER TEMP
one more snowflake
FRIDGE TEMP
one less snowflake
FREEZER TEMP
one less snowflake