Blatchford SmartIP Instrucciones De Adaptación página 2

Limb Set Up
EN
Limb Set Up
Adjust for static alignment as shown in the ESK+ fitting instructions supplied with the
module.
Adjust for static alignment as shown in the ESK+ fitting instructions supplied with the module.
Cushion Valve adjustment - If after programming for the first time, the user experiences too
Cushion Valve adjustment - If after programming for the first time, the user experiences too much or too little damping at the end of the swing, the cushion valve may be
much or too little damping at the end of the swing, the cushion valve may be djusted. Fine
adjusted. Fine Tuning MUST always follow any cushion valve adjustment.
Tuning MUST always follow any cushion valve adjustment.
Smart IP operation Smart IP operation
START
Fully Fully Fully Fully
extend extend
Calibrate Limb to User Calibrate Limb
& enter Program mode & enter Program mode
Approx. 12m (40') required
Programming Programming
vary speed gradually for approx. 200 steps vary speed gradually for approx. 200 steps
Prosthetist Fine Tuning
START
Fully Fully Fully Fully
extend extend extend extend
maximum 4 seconds
vary speed gradually for approx. 200 steps vary speed gradually for approx. 200 steps
User Fine Tuning
(repeat 'Prosthetist Fine Tuning')
START
vary speed gradually for approx. 200 steps
refrain from sitting during programming
Fully Fully Fully Fully
extend extend
maximum 6 seconds
UNTIL
refrain from sitting during programming refrain from sitting during programming
Fully Fully Fully Fully Fully Fully
extend extend
refrain from sitting during programming refrain from sitting during programming
2 secs
x2 x2
4 secs
Save & Exit Save & Exit
HOLD
Flex to greater than 40 °
Fully Fully Fully Fully Fully Fully
extend extend extend extend
x1
STOP
2 secs 2 secs
x2 x2
HOLD HOLD
Walk at various speeds to ensure user
x2 x2
40° +
Fully
extend
2
2 secs 2 secs
x3 x3
HOLD HOLD
Save 4 secs
& Exit
HOLD
Flex more than 40 °
Save 4 secs
& Exit
HOLD
Flex more than 40 °
is completely satisfied.
EN
x2
Fully
extend
x2
Fully
extend
END
938250/4-0719