Power Source - SACKit WOOF it JAM Manual Del Usuario

Connections
MINI JACK socket
Connects headphones to the speaker.
When you connect headphones the
sound will reduce immediately, but within
2 seconds, the sound level will increase
gradually to protect against hearing
damages.
AUX IN socket
Connects to the headphone socket of a
computer, portable audio device, etc. or
even your home stereo. If connected to
your home stereos AUX IN, you can play
sound wirelessly from your device (on
your home stereo system).
UK
7
Micro USB socket
Charges the device by the USB cable.
This socket is used for charging only,
Audio signal, etc. cannot be sent via this
socket.
Functionality

Power source

Turn WOOFit JAM S on/off
Long press "Power Button" to turn
WOOFit JAM S on/off. When turned on
the blue "Power indicator" light is on.
Charge the device
Firmly connect the micro USB jack on
the back of the device via the micro USB
cable, and plug the USB cable to your
computer or adaptor. Charging begins
automatically, whether the system is
turned on or off. The charging status is
displayed on the device (the indicator
light will show RED. Once the device
is fully charged, the light will go out). It
takes two hours to charge the speaker.
Motion sensor
When motion is registered in the
"Motion sensor area" all buttons light
up. This makes it possible to operate the
device in darkness/low light.
UK
8