Bluetooth Connection - SACKit WOOF it JAM Manual Del Usuario

Connect to WOOFit JAM S

Bluetooth connection

1. Press "Play/Pause Button" for
3 seconds. When the indicator
light shows fast blue and red flash
alternatively, the WOOFit JAM S
enters pairing mode. (Notes: Pairing
mode is cancelled after 3 minutes,
along with a "Beep" sound. If you want
to enter into pairing mode again, start
over from step 1). As soon as your
device is paired with the WOOFit
JAM S the indicator light turns
flashing blue.
2. Perform the pairing procedure on the
Bluetooth device to detect the system.
A list of detected devices appears on
UK
the display of the Bluetooth stereo
audio source device. This system
9
is displayed as "WOOFit JAM S". If
"WOOFit JAM S" is not displayed,
repeat from step 1. (Note: When
pairing, be sure to keep both Bluetooth
devices within 1 meter range of each
other.)
3. Select "WOOFit JAM S" shown in the
display of the Bluetooth device.
4. Option: If Passcode * input is required
on the display of the Bluetooth device,
input "0000". (Note: Passcode may
be called "Passkey", "PIN code", "PIN
number" or "Password")
5. Start the Bluetooth connection from
the Bluetooth device. The system
remembers the device as the last
connected device. Some Bluetooth
devices may connect with the system
automatically when pairing is complete.
6. If you experience problems with
connecting, you can reset the device
by turn off the speaker and turn it
on again. When you have reset the
device, start over from step 1.
NFC Connection
1. Turn on NFC on your Bluetooth
device (If your device has NFC
function)
2. Bring your device close to the
WOOFit JAM S NFC area (On the
front of the speaker right above the
SACKit logo.)
3. The two devices will be connected by
NFC of each other.
4. Repeat this for disconnecting the NFC
connection.
AUX connection
1. Press "M Button" to select AUX mode
and connect your music source to the
AUX IN socket.
2. If you want to change from Bluetooth
mode, you have to turn off the
Bluetooth to be able to switch to AUX
mode, as the Bluetooth connection is
always given the highest priority.
UK
10