Publicidad
Step 9
Carefully turn your unit over onto its front edges. Unfold the
å
BACK (L) and lay it over your unit.
A perforation in the BACK (L) has been provided for access
å
to the SAFETY STRAP. Punch out the perforation and push
the SAFETY STRAP through the hole.
Make equal margins along all four edges of the BACK (L).
å
Push on opposite corners of your unit if needed to make
it "square".
Fasten the BACK (L) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up over
å
the FIXED SHELVES (D and E).
NAIL
(70 used in this step)
These holes must line
up over the FIXED
SHELVES (D and E).
1N
L
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Before fastening the
BACK, punch out the
perforation and push
the SAFETY STRAP
Safety strap
through the hole.
Page 13
Publicidad
