oneConcept 10021801 Manual De Instrucciones página 10

CD Operation or CD MP3
1. Slide the function selector to CD
2. Press the button [^] to open the CD compartment, insert the CD and close the com-
partment.
3. The CD is read in and the number of tracks is shown in the display
4. Press PLAY to start the player / press it again to stop the playback temporarily (pause)
5. Press [SKIP UP] once briefly for the next track
6. Press [SKIP DOWN] once to return to the beginning of current track, press twice to go
the previous track.
7. Press and hold down to fast forward within the track
8. Press STOP to Stop the CD playback
9. To skip 10 tracks at once, press the +10 button.
10. To skip Album, press STOP and press Album button to select an album.
CD Repeat
Press 1x REPEAT to repeat the current track
Press 2x REPEAT to repeat ALBUM
Press 3x REPEAT to repeat all tracks or the program
USB Operation
The USB port provides up to 500mA power and charge your mobile phones or tablets. This
unit cannot charge Apple's device due to their power authentication requirement. The USB
connectivity enables you to connect and play MP3 tracks from USB mass storage. It is not
recommended to use a USB extension cable. The device connected via the cable will not be
recognized by this unit.
1. Pluga a USB into USB socket and remove a CD in CD compartment
2. The USB is read in and the number of tracks is shown in the display
3. Press PLAY to start the player / press it again to stop the playback temporarily (pause)
4. Press [SKIP UP] once briefly for the next track
5. Press [SKIP DOWN] once to return to the beginning of current track, press twice to go
the previous track.
6. Press and hold down to fast forward or backward within the track
7. To skip 10 tracks at once, press the +10 button.
8. To stop playback, press the STOP button.
Compatible USB Devices:
• USB flash memory (USB 2.0 or USB1.1)
• USB flash players (USB 2.0 or USB1.1)
• Memory cards (requires an additional card reader to work with this unit)
10