Parts And Accessories - Forch 5439 172 Manual Del Usuario

Avoid Blowing Fuses
Resulting from the increased power rating of the Testing Device Switch, more current will now flow when pressing the switch. You
will find that the Testing Device Switch will now power up higher current rated electrical components.
Warning: Grounding a positive circuit with the Testing Device Switch can blow a fuse, if the fuse is directly connected
in series to the circuit being grounded. Please study illustration.
In this circuit
30amp, fuse may
blow if power switch
is pressed negative.
Notice the fuse is
connected in series
with the Testing
Device Switch

Parts and accessories

Safe tto ground this circuit
1. Tip 23 cm PN006L
2. Regular tip PN006
3. Red/Green LED (Requires soldering) PN008
4. Cigarette lighter adapter PN037
5. Hook-up clip assembly PN034
6. Circuit breaker (Requires soldering)PN031
7. Rocker switch (Requires soldering)PN005
8. Extending your Testing Device Switch lead is a snap with lead extension.
9. Extension lead: 6 m PN036
10.Housing Switch, black PN001
11.LED holder PN009
12.Resistor PN010
13.Negative clip with cable PN026
14.Case without accessories PN038
15.Accessory kit AZPP