•Do not try to pull any electrical appliance out when it has
fallen into water - disconnect the plug from the power
socket immediately.
•Make sure the unit is perfectly dry before using it.
•Do not put the appliance on heat sensitive surfaces during
use.
•After use always switch the unit off and remove the plug
from the power supply socket. Do not pull on the wire to
remove the plug from the power supply socket. Do not pull
the plug out of the power supply socket when your hands
are wet.
•Always allow the unit to cool before putting it away and
never wrap the cord around the unit.
•Check that the cord has not been damaged from time to
time.
•Prevent the cord from coming into contact with the metal
parts while these are still hot.
•Use the unit on dry hair.
•Do not use this unit on wigs that have synthetic hair.
•The elements used to pack the unit (plastic bags, cardboard
box, etc.) must be kept out of reach of children as they are
a potential danger to them.
•This unit must only be used for the purposes for which it is
expressly intended. Any other use is to be considered
improper and therefore dangerous. The manufacturer
accepts no responsibility for damage caused by improper
or erroneous use.
•Do not use hair spray while the unit is running.
•Keep the plates clean and free of dust, hair spray, styling
gel, etc.
•To avoid dangerous overheating, it is advisable to unwind
the entire length of the cord.
•The A-weighted sound pressure level of the hair crimper
for professional use is below 70 dB(A).
•Designation of the appliance (see technical product
specifications)
HAND-HELD HAIR CRIMPER FOR PROFESSIONAL USE
OPERATING INSTRUCTIONS
PARTS
1 Appliance
2 Plates
3 ON/OFF switch
4 Temperature switch
5 Indicator light
6 Cold end
5