Instructions For Wall Mounting - HJM 636 Instrucciones De Uso

2. This product should be mounted on the wall, 1.8m above the floor. The air outlet
should face downwards. The hanger should be fixed on the wall by an expandable
tubular self-tapping screw.
3. The power supply plug should be fitted into the power socket. (Requirements for the
power socket and power cord: A.C. 220-240V, 50/60Hz, >10A). The warm-air blo-
wer should not be used under a fixed socket.
4. Placing the power socket under the air outlet of the warm air blower is strictly pro-
hibited.
5. When the machine is under normal operation, keep your bare skin off the surface of
the air outlet. In the presence of unattended children, animals or any person who
can not properly regulate himself, this machine should not be used.
6. In the absence of the operator, the machine should not be used and the power cord
plug should be pulled out of the power socket.
7. In case that the power cord or its plug is broken, or the warm-air blower breaks
down, drops to the floor or is otherwise damaged, the use of the warm-air blower is
strictly prohibited, and it should be sent to the designated service center for inspec-
tion and maintenance.
8. Outdoor use of this warm air blower is strictly prohibited.
9. Using this warm-air blower in the bathroom or in the vicinity of the swimming pool
is strictly prohibited.
10. When the machine is working, obstructing the air inlet and air outlet with any objects
(paper or curtain) is strictly prohibited. Otherwise, unexpected hazards may arise.
11. The warm air blower should not used in places where petroleum, paint or other flam-
mable liquids are present.
12. When it is not necessary to use the warm air blower, press the OFF button first and
then pull out the power cord plug.
13. To clean the warm air blower, pull out the power cord plug; to disconnect the warm
air blower from the power supply, press the OFF button first, and then hold the
power cord plug and pull it out. Do not pull the power cord fiercely.
14. Coverage or improper positioning of the warm-air blower may give rise to fire acci-
dents. Therefore, this product shall not be controlled through devices equipped with
the automatic power-on programmer, timer or any other similar devices
15. To avoid overload of the current, do not share the power socket with other electri-
cal appliances.
16. In case of any failure of the product, please contact the after-sale service center for
inspection and maintenance. Arbitrary removal of the parts and replacement of
them with the accessories which are not in compliance with the safety requirements
is strictly prohibited.
17. If the power cord is broken, in order to ensure safety, it must be replaced in the
manufacturing plant or its service center, or other similar professionals.

Instructions for wall mounting

1. The machine should be mounted 180cm above the
diagram, drill in the wall two holes with a diameter of 0.8cm and a depth of 3.5cm.
The space between the two holes should be 56cm, and a minimum distance of
20cm should be retained between the hole and the side wall.
floor. As is shown in the following
–12–
E
N
G
L
I
S
H