Function Setting - HJM 636 Instrucciones De Uso

2. As is shown in the following diagram, insert the plastic expansion plug in to the hole,
and then drive the screw into the plastic expansion plug. Do not drive the screw
completely into the plastic expansion plug; rather, a clearance of approximately 1cm
should be retained between the screw head and the wall. (For the sake of safety, the
screws must be securely fixed.)

Function setting

1. Selection of heating power:
Low heating power 1.000W
High heating power 2.000W
2. The function of timed shutdown
The function of timed shutdown can be activated. The preset time ranges from 1h
to 15h, and each press of the "TIMER" button represents an increment of 1h for the
preset time. Timed shutdown can be set when the machine is switched on.
3. The function of air flap adjustment
When the machine is switched on, the air flap can be set to move upwards and
downwards. Thus, cold/warm air can be evenly distributed to every desired direction.
4. The function of prompt tone
Once the buzzer is activated, it will send out a beep for each effective key-press.
5. The function of safety protection
The machine is equipped with a mechanic-type thermostat and a single-use ther-
mal cut-out, thus ensuring the safety of the product and the user, in case that the
motor does not work or unexpected overheating arises in the machine.
–13–
E
N
G
L
I
S
H