Power Supply - Rollei Lumen Stick RGB Manual Del Usuario

8

Power supply

• Use with mains adapter: Please plug the supplied mains
adapter into the mains connection. Slide the on/off switch to
"Input DC" to switch on the LED light.
• Use with rechargeable batteries: Insert the supplied batteries
into the battery compartment and slide the on/off switch to
"Battery" to turn on the LED light.
• Note: Please charge the batteries completely before using them
for the first time. Always use the original charger to charge the
batteries.
CCT – Correlated Color Temperature
A
CCT Mode
CCT:4500K
GN: 0
BRI: 0%
B
Adjust color temperature and brightness:
• After switching on, move the slider to "CCT".
• Turn knob (A) left or right to increase or decrease the Kelvin
value.
• The color temperature can be set between 3200K and 9999K in
steps of hundred Kelvin.
• Press the setting knob (A) to increase the green portion of the
selected color temperature.
• The menu item "GN" is highlighted in the display and the green
component can be adjusted to the light situation by turning the
setting knob (A).
• The brightness can be adjusted between 0% and 100% with
the adjustment knob (B) (steps: 20%, 21%, 22%, 23%, 24%,
25%,...).
ENGLISH
Rollei Lumen App
Download the "Rollei Lumen" app directly from the App Store or
the Google Play Store (iOS 9.0 or higher, Android 5.0 or higher)
Connection with the smartphone
1. Activate Bluetooth * on your smartphone
®
2. Switch on the Rollei Lumen Stick RGB
3. Open the "Rollei Lumen" app, the connection to your phone
will be established automatically.
Note:
• The connection is established using "Bluetooth Low Energy"
(BLE). For this, a location release of the app is required. The
connection to the LED light is established directly
in the app.
Download on the
Save Color Features and Brightness:
• You have the possibility to save up to 8 different color profiles.
• Select your desired color temperature and brightness.
• Then press the setting knob (B) and select the "Preset Temp"
menu by turning the setting knob (B). Press the setting knob (B)
again to select the function.
• Now turn the setting knob (A) to select the different memory
locations.
• To save the set color temperature and brightness, press the
setting knob (A) once.
• To recall the saved settings, press the adjustment knob (B),
select the "Preset Temp" menu and select the memory location
with the adjustment knob (A).