Publicidad
Enlaces rápidos
AUTOMOTIVE PRODUCTS, INC.
STEP BAR ASSEMBLIES
ENSAMBLES DE ESTRIBOS
ENSEMBLES DE MARCHE-PIEDS
25-2270
25-2275
ITEM
QTY
1,2
2
STEP BAR, PASSENGER (1) AND DRIVER (2)
3,4
2
REAR BRACKET, PASSENGER (3) AND DRIVER (4)
5,6
2
FRONT BRACKET, PASSENGER (5) AND DRIVER (6)
7
10
PLASTIC WASHER
8
10
BOLT PLATE
9
10
3/8" FLAT WASHER
10
10
3/8" LOCK WASHER
11
10
3/8-16 HEX NUT
12
8
3/8-16 X 1.25 BUTTON HEAD BOLT
13
8
3/8" INTERNAL TOOTH LOCK WASHER
1,2
2
ESTRIBOS, ACOMPAÑANTE
3,4
2
SOPORTE
5,6
2
SOPORTE DELANTERAS , ACOMPAÑANTE
7
10
ARANDELAS DE PLÁSTICO
8
10
PLACAS DE PERNOS
9
10
ARANDELAS PLANAS DE 3/8"
10
10
ARANDELAS DE PRESIÓN DE 3/8"
11
10
TUERCAS HEXAGONALES DE 3/8- 16
12
8
PERNO TERMINAL DE 3/8 - 16 X 1
13
8
ARANDELA DE PRESIÓN DE DENTADO INTERIOR DE 3/8"
1,2
2
MARCHE-PIEDS,
3,4
2
SUPPORTS ARRIERE
5,6
2
SUPPORTS AVANT
7
6
RONDELLE EN PLASTIQUE
8
10
PLAQUETTE DE BOULON
9
10
3/8 PO RONDELLE PLATE
10
10
3/8 PO RONDELLE A FREIN
11
10
3/8-16 ECROU HEXAGONAL
12
8
BOULONS À TÊTE RONDE 3/8-16 X 1,00 PO
13
8
RONDELLES FREIN À DENTS INT RIEURES 3/8 PO
STEP 1.
Remove contents from box and check for damage. Verify all parts are present. Read instructions
completely before beginning.
STEP 2.
Locate passenger side mounting locations on vehicle.
STEP 3.
Install plastic washers onto bolt plates. Install bolt plates as shown.
STEP 4.
Attach passenger side front and rear mounting brackets to underside of rocker panel as shown.
FIGURES 2 AND 3.
STEP 5.
Place passenger side step bar on saddles with WESTIN Logo facing outwards. Assemble with 3/8"
hardware. Hand tighten.
STEP 6.
Make sure step bar and brackets are properly aligned with vehicle and tighten fasteners.
Recommended torque values are 26 Ft. Lbs. for 3/8" fasteners and 19 Ft. Lbs. for 3/8" button head
fasteners.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 2001-06 HYUNDAI SANTA FE
APLICACIÓN:
APPLICATION: HYUNDAI SANTA FE 2001-06
2
CONTENTS -
CONTENIDO
(1)
Y EL CONDUCTOR
TRASERAS
, ACOMPAÑANTE
(3)
PASSAGER (1) ET CONDUCTEUR (2)
,
PASSAGER (3) ET CONDUCTEUR (4)
,
PASSAGER (5) ET CONDUCTEUR (6)
É
Hand tighten.
SEE FIGURE 4.
HYUNDAI SANTA FE, MOD. 2001-06
3
5
- CONTENU
(2)
Y EL CONDUCTOR
(4)
(5)
Y EL CONDUCTOR
(6)
SEE FIGURES 2 AND 3.
4
TOOLS -
HERRAMIENTAS
9/16" SOCKET
7/32" ALLEN WRENCH
TORQUE WRENCH
RATCHET
DADO DE 9/16"
LLAVE DE ALLEN 7/32"
LLAVE DE TORQUE
MANERAL
DOUILLE 9/16"
CLEF DE ALLEN 7/32"
CLEF DE COUPLE
CLIQUET
Repeat for driver side.
SEE FIGURE 1.
WO:
75-0513 REVISION B 10/19/07
7
6
8
- OUTILS
SEE
Publicidad
Manuales relacionados para Westin 25-2270
Resumen de contenidos para Westin 25-2270
- Página 1 Attach passenger side front and rear mounting brackets to underside of rocker panel as shown. FIGURES 2 AND 3. Hand tighten. STEP 5. Place passenger side step bar on saddles with WESTIN Logo facing outwards. Assemble with 3/8” SEE FIGURE 4. hardware. Hand tighten. STEP 6.
- Página 2 FINISH PROTECTION Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
- Página 3 FIGURA 4 ACCESORIO DE ESTRIBO FIGURE 4 FIGURE 4 FIXATION DU MARCHE-PIEDS FIXATION DU MARCHE-PIEDS Thank You for choosing Westin products Westin Automotive Products, Inc. For additional installation assistance please call 5200 N. Irwindale Ave. Suite 220 Irwindale, Ca. 91706...