Preset Memory - SOUNDMASTER FUR100 Manual Del Usuario

SNOOZE OPERATION
When alarm is sounding, press
the set snooze duration.
Note: If your second alarm activates while the first alarm is sounding or it is in the snooze mode,
the second alarm overrides the first alarm (the first alarm is reset to come on the next day).
1. When radio is turned on, press and hold "RADIO/SLEEP" to enter the sleep mode. The
SL LED appear and the sleep time "05" (5 minutes) appear on the display.
2. Press the "RADIO/SLEEP" again as needed to adjust the sleep timer from 5, 15, 30, 45, 60,
75, 90 or OFF.
3. When the display changes back to show the time, press and hold "RADIO/SLEEP" to show
the sleep time remaining.
4. The radio will play for the programmed sleep time and then shut off.
5. To turn off the radio before the sleep time has elapsed, press
Press to select the LED brightness (high / low / off) of the LED display. This can only be
done when the radio is off.
To turn on the radio, press "RADIO/SLEEP" once, the display shows "ON" and then the
1.
radio frequency readings in Mhz.
Press  or  to tune the radio to a desired station. Press and hold
2.
next clear station.
To adjust the volume, press "VOL" once, the display shows "L06", press
3.
volume from L00 (sound off) to L15 (maximum).
4. Press to turn off the radio.
Remark: Keep your radio away from fluorescent lamps or other electronic devices, which may
cause interference to the radio.

PRESET MEMORY

The unit has 10 preset memories for FM.
1. Turn on the radio and select a radio station you like to memorize.
2. Press and hold the "SET" button until "ME" LED appears and "P01" flashes. Press "SET"
once to store Memory 1.
3. Press / to select another station you like to memorize. Then press and hold SET until
"ME" LED appears and "P01" flashes. Press
store Memory 02.
4. Repeat step 2 to 3 to preset memories 3 through 10.
5. To access a preset station at any time, press the "SET" one at a time while the radio is on.
6. To edit a preset station, select another station and then repeat step 2 to 4. This overrides
the original settings.
once, the alarm will be silenced and come on again after
SLEEP TIMER
DIMMER
RADIO
once, "P02" flashes. Press "SET" once to
5
FUR100 / English Instruction Manual
once.
/ to scan for the
/ to adjust