Step 3 - Complete The Installation - Haier HRB15N3 Serie Manual Del Usuario

7. Remove the new hinge cover from the accessory bag. Insert the
wiring cable through the clips on the underside of the cover, and
then fit the cover over the hinge.
a
a
Wiring Cable
8. Flip the hinge screw cover, and insert it into the interior edge of
the door.
a
a
Hinge Screw Cover
9. Replace the door top plate.
a
a
10. Connect the ends of both wire harnesses.
NOTE: Make sure the wiring is pressed firmly into the clips, and
fit the excess length into the cabinet opening.
a
a
Wiring Harnesses
b
Wiring Cover
Top Plate
b
11. Replace the wiring cover on top of the refrigerator cabinet, and
fasten with the four screws.
a
12. Insert the hinge screw covers into the wiring cover on the top of
the cabinet.
a
Hinge Screw Covers
STEP 3 - COMPLETE THE
INSTALLATION
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power
cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, re or
electrical shock.
1. Plug into a grounded 3 prong outlet.
2. Return all removable door parts to door and food to refrigerator.
NOTE: This refrigerator begins operating as soon as it is connected
to the power supply.
a
Screws
a
9