Step 4 - Leveling And Door Adjustment; Refrigerator Use; Using The Controls - Haier HRB15N3 Serie Manual Del Usuario

STEP 4 - LEVELING AND DOOR
ADJUSTMENT (IF NEEDED)
The refrigerator must be level to maintain optimal performance and
appearance.
LEVELING
1. Move the refrigerator to its final location.
2. Turn the feet on the bottom, front of the cabinet to raise or
lower that side of the refrigerator until the refrigerator is level
side-to-side.
3. Turn both front legs, by the same amount, to slightly raise the
front of the refrigerator. This will make it easier for the doors to
close.

REFRIGERATOR USE

USING THE CONTROLS

a
b
c
d
e
f
g
a
Refrigerator Temperature
Indicator
b
My Zone Temperature
Indicator
c
Freezer Temperature
Indicator
d
Quick Cool Indicator
e
Quick Freeze Indicator
f
Sabbath Indicator
g
Lock Indicator
TOUCH PADS
The controls are touch pads, which respond when lightly touched.
10
h
Fridge
i
My Zone
j
Freezer
k
Quick Cool
l
Quick Freeze
m
Sabbath
Hold 3 sec.
Lock n
Hold 3 sec.
h
Fridge Temperature Control
i
My Zone Temperature
Control
j
Freezer Temperature
Control
k
Quick Cool Control
l
Quick Freeze Control
m
Sabbath Mode Control
n
Lock Control
NOTE: Having someone push against the top of the refrigerator
takes some weight off the leveling screws. This makes it easier
to turn the screws.
CONTROL PANEL LOCK
The control panel is automatically locked after 30 seconds of non-
use. To change any settings the control panel must be unlocked.
To Unlock the Control Panel:
1. Press and hold LOCK for 3 seconds. The Lock indicator will turn
OFF.
To Lock the Control Panel:
1. Press and hold LOCK for 3 seconds. The Lock indicator will turn
on.
Hold 3 sec.
TEMPERATURE DISPLAY
C
My Zone
Fridge
When no buttons or doors are operated for 30 seconds, all the LEDs
on display panel turn off.
When a button is pressed or a door opened, the LEDs on display
panel illuminate.
UNITS SELECT
The Units Select feature allows you to choose between displaying
the set temperature in either degrees Fahrenheit (°F) or degrees
Celsius (°C).
The default temperature unit is degrees Fahrenheit.
1. If locked, unlock the control panel by pressing and holding LOCK
for 3 seconds.
2. Press and hold FRIDGE and FREEZER at the same time for
3 seconds. °C will appear next to the temperature display to
indicate that the unit has been changed to degrees Celsius.
Lock
Hold 3 sec.
Lock
C C
Freezer