Replacing Alkaline Batteries - GMI V!SA Manual De Instrucciones

4.3.3 Replacing Alkaline Batteries

CAUTION: To be in compliance with the
certification regulations of this product, use only
alkaline batteries from the following
manufacturers:
- Energizer / Energizer Industrial
- Panasonic
- Sony.
WARNING: When replacing batteries in the alkaline
battery pack, make sure that you are in a safe area
and the instrument is switched Off. Do not open an
alkaline battery compartment cover or replace the
batteries in a hazardous area. Never attempt to
charge an alkaline battery pack and never use
rechargeable batteries in an alkaline battery pack.
To reduce the risk of explosion, do not mix new
batteries with used batteries, or mix batteries from
different manufacturers.
The alkaline battery pack (Part No. 66210) allows the
instrument to be powered using three LR6 (AA) size
batteries.
Always switch the instrument Off before changing the
battery pack.
• Release the cover plate retaining screw, securing
the battery pack cover, by turning it in a counter
clockwise direction. Use the Battery / Sensor Grille
Key (Part No. 66166).
4-17