Technical Data - Marmitek MS90 Modo De Empleo

TEST MODE:
TESTING THE LOCATION OF YOUR MOTION DETECTOR
1. Set the switch (4) to 1.
2. Press the TEST button (3) until the indicator (2) flashes twice.
3. Wait 20 seconds.
4. Walk in front of the sensor. The indicator (2) lets you know when a movement has been
detected. This allows you to check whether the sensor has been mounted on the right
place.
5. Press the TEST button again to be able to use the sensor as normal.
☺ After 2 minutes the motion detector will go back to the normal mode.

TECHNICAL DATA

Power : 2x AA battery
RF Range: Up to 30m through walls and ceilings
PIR range: 180º - 6 meter, in a straight line - 12 meter
Dimensions: 76x100x42mm
Frequency: 433.92 MHz
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging
must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed
of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and
electronic equipment via designated collection facilities appointed by the government or local authorities. Correct dis-
posal and recycling will help prevent potential negative consequences to the environment and human health. For
more detailed information about the disposal of your old equipment, please contact your local authorities, waste dis-
posal service, or the shop where you purchased the product.
4 MARMITEK