OPERATING INSTRUCTIONS
Open the recorder door
and remove the knob
of the clockwork by
turning it clockwise
Lift the pen arm gently
in a 90 degree angle
Retum the knob of the
clockwork by turning it
anti‐clockwise.
Wind up max. 5 turns
Remove the protective
cover of the recorder
pen
Zero‐adjustment:
Turn the screw gently.
At normal usage zero‐
adjustment is not
required
Removing the pen from the pen arm
4
Switch the start/stop button
to start.
Put the recorder chart in the
recorder
Make sure that the chart is
placed under the chart clips
4x for case 192x192 mm
3 x for case 280x280 mm
Put the pen arm back on the
chart