Safety Instructions - wolfcraft 6165 Manual De Instrucciones

• Read the information given in the operating instructions of the circular saw, jig saw or router to be mounted.
• These appliances have to be in accordance with the VDE-regulations. Appliances built after 1995 have to have a CE-sign.
• The use of circular saw blades made of high-alloyed HSS is not permitted!
• Use only faultless saw blades; the basic body can not be thicker and the crossing can not be smaller than the width of the splitting wedge.
• Check in regular intervals, that all screws are tightened!
• Never use your work table improperly or in a way, it was not intended to be used!
• Remove all objects, which will not be used, from the work table!
• Do not use for cutting of firewood.
• Cutting of round wood is only permitted, if the work piece is secured against distortion from both sides.
• Do not process materials other than wood or easy to chip plastics. Exception: Using a suitable saw blade, easy to chip metals (such as aluminium) can also
be processed.
• Never move work pieces against the working direction while the machine is running!
• Near the running saw blade, loose splinters, chips or similar materials must not be removed by hand!
• After switching off the machine, the saw blades must not be stopped by lateral counterpressure!
• Disconnect the power:
- before changing of attachments or tools
- before maintenance jobs
- while not in use
• Before starting to work check the function of attachments and tools. Never work with damaged or blunt tools.
• Ensure that the workbench is positioned on a level and firm surface.
• Use all tools only for their original purpose.
• Never remove existing protection devices.
• Make sure you clothing fits closely (especially sleeves) and protect your hair.
• Protect your hearing during jobs, which cause a lot of noise.
• Wear goggles during all jobs.
• Never work towards your body.
• Never grasp into running appliances.
• Make sure all electrical tools are protected from moisture, dust or humidity.
• Keep children away from your workshop and store your appliances and tools in a safe place.
• Never let inexperienced people work with your appliances or tools without supervision.
• Always work according to a plan and with concentration.
• Keep your working area tidy.
• Use only Original wolfcraft ® spare parts
• Use the dust extraction of your circular saw.
• It is not permitted to remove the splitting wedge of the circular saw.
• Power tools should be used carefully and treated with respect. Failure to do this could lead to accidents.
• Ensure that you have sufficient lighting.
• Always bear in mind that the work piece can spring back when sawing. Using the saw table or router table functions.
Only valid for table saws:
• Do not work without the protection hood! Fold the protection hood down as far as the work piece allows.
• Always use a push stick when cutting narrow work pieces (distance between parallel stop and saw blade less then 120 mm).
• A deflector wedge should be used to make sure, that the toothed rim of the saw blade will not catch and throw out any cut-off pieces (page 18 - 12).
• The gap insert is to be replaced should the saw gap be damaged.
• To permanently fix the switch to „ON", use only the accompanying switch clamp (page18 - 13.2). The saw must be switched on/off using only the safety
switch.
This is only valid for routers:
• When working with router it is mandatory to use the parallel stop Art. No.: 6114000 or the curve milling guide Art. No.: 6115000.
5 years Guarantee
wolfcraft ® Guarantee
Dear hobbyist!
You have purchased a high-quality wolfcraft
undergo intensive development and test phases before leaving the factory. Constant controls and regular tests during their manufacture, ensure a high quality
standard. Sound technical developments, and reliable quality controls warrant for the right choice of appliance. This wolfcraft
period of five years.
5 years Guarantee
Should your appliance fail within the guarantee period owing to a material fault, it will be replaced by wolfcraft
from the date of purchase, which must be certified on the guarantee card by the dealer's stamp and signature. Retain the receipt. The validity of this
guarantee is subject to the use of the appliance solely for domestic purposes, proper handling and the use of original wolfcraft
guarantee are only valid with a fully completed guarantee card.
Declaration of Conformity pursuant to Directive 2006/42/EC on Machinery, Annex II A
wolfcraft GmbH in D-56746 Kempenich, Wolff-Str. 1, hereby declares that this product (6165) conforms to Directive 2006/42/EC on Machinery.
Kempenich, 02.04.2011
Michael Bauseler
Authorized CE representative
(Management/Technology/Logistics; wolfcraft GmbH)
t

Safety instructions

® appliance, which we know you will enjoy using. wolfcraft ® appliances are built to high technical standards, and
®
22
appliance is guaranteed for a
®
free of charge. The guarantee period begins
® spare parts. Claims under