Features; Assembly - Klutch NT1G Manual Del Operador

PRODUCT SPECIFICATIONS
Wheel Size .............................................................4-1/2 in.
Cord Length ...............................................................10 ft.
Arbor Size ................................................ 5/8 in. x 11 UNC
KNOW YOUR ANGLE GRINDER
See Figure 1, page 14.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
LOCK-ON BUTTON
The lock-on button is convenient for continuous grinding for
extended periods of time.
UNPACKING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the Includes list are
included.
WARNING:
Do not use this product if any parts in the Includes list
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-556-7885 for assistance.

FEATURES

No Load Speed .................................. 11,000 r/min. (RPM)
Input ............................... 120 V, 60 Hz, AC only, 5.5 Amps
Net Weight ................................................................. 5 lbs.
SIDE HANDLE
The side handle can be installed on the top, left, or right side
of the grinder, depending on operator preference, for stabi-
lization and must be used during all operations. In addition
to maintaining safe control during use, the side handle also
provides convenient ease of operation for the operator.
SPINDLE LOCK
The spindle lock keeps the spindle from turning while install-
ing and removing wheels and disks.
TOOLLESS GUARD
A toolless guard deflects sparks and metal chips during use.

ASSEMBLY

WARNING:
If any parts are damaged or missing do not operate
this tool until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
9 - English