Lanaform Pommy Manual De Instrucciones página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
COMPONENTS (Fig. 1 and 2)
EN
1. Mist outlet
2. Reservoir
3. Base
4. Main switch (ON/OFF and vapour adjustment)
5. Transformer
6. Water reservoir lid
7. Foam for organic essential oils
8. Base cover
9. Transducer
10. Light indicator
11. Level detector
INSTRUCTIONS FOR USE
Features:
• 1.2 L capacity;
• Runs continuously for 10 hours;
• Easy-to-fill water reservoir;
• Foam acts as a carrier for diffusing essential oils.
Functions:
• Increases and adjusts the relative humidity of the room;
• Eliminates electrostatic charges;
• Improves ambient air quality.
How to use:
• Place the device in the room half an hour before turning it on to allow it to adjust to room temperature.
• Remove the device's reservoir (Fig. 3), unscrew the cap by turning it in an anti-clockwise direction (Fig. 4)
• Fill the reservoir with clean water up to 40°C (Fig. 5). Screw the cap back on by turning it in a clockwise direction.
N.B.: Do not fill the reservoir from the top or through the mist outlet. (Fig. 6)
• Make sure it is clean and water-tight then carefully put the reservoir on the base unit. (Fig. 7)
• "Pommy" includes a starter foam for essential oils that is already lemon-scented, so do not add any organic essential oils. The foam
carrying essential oils is located in the mist outlet (the rod in the "Pommy") Fig. 8). This starter foam can be used several times.
• To change the foam and add your own essential oils, remove the mist outlet (the rod inside the "Pommy") and take out the existing
foam (Fig. 9 and 10). You can now add 2-3 drops of organic essential oils before removing the foam in the mist outlet (Fig. 11). Please
note: read the paragraph on the use of essential oils in this handbook.
• With dry hands, connect the power supply plug and switch on the device. The blue light indicator comes on. The device then starts to
work. (Fig. 12).
• The light indicator changes from blue to red when there is no longer any water (Fig. 13).
• Adjust the vapour intensity you require by turning the vapour intensity control button (Fig. 14).
• Close monitoring is needed in every instance to avoid any risk.
PLEASE NOTE: Using essential oils:
Use only the foam carrying organic essential oils located in the mist outlet to diffuse organic essential oils in the room. Pour a few drops
of organic essential oils on to the foam and then replace the mist outlet. (Fig. 9, 10 and 11).
Never pour organic essential oils directly into the water reservoir as this could cause irreparable damage.
Before choosing the organic essential oils you will be using for diffusion, you must ask the shop's sales staff for
advice.
POMMY
7

Publicidad

Tabla de contenido
loading

Tabla de contenido