Zoom Function - LaserLiner AC-tiveFinder Instrucciones De Uso

2
Localising electrical voltages
Position the detector tip in the
area to be tested (e.g. cable,
socket. etc.).
!
For safety, check all three phase conductors (L1, L2, L3) for
the presence of voltage!
!
If the acoustic signal is weak or the battery lamp is not as
bright as it should be, replace the batteries.
3

ZOOM function

Press the ZOOM button to
increase the sensitivity of the
device (24 V AC to 1000 V AC).
This enables voltage fields to be
located at significant distance by
moving the device over the area
to be tested.
Please be aware that even if a visual signal is not displayed,
voltage may still be present. Differences in the design of the
!
connection socket or the nature of the insulation (thickness
and type) can affect functionality. Voltage cannot be detected
behind panels and metal covers.
4
Battery lamp
To switch on the battery lamp, press and hold down button 4.
The light switches itself off automatically as soon as the button
is released.
8
GB
If voltage is present, the detector
tip lights up and a signal sounds.
If voltage is present, the detector
tip lights up and a signal sounds.