Quantum Qpaq X Instrucciones De Operación página 2

WARNINGS
• High Voltage!! Do not insert metal objects into any sockets
of Qpaq!!
• Turn the Command Module OFF when connecting or disconnect-
ing a Qflash, or Qpaq Module!!
• Always cover unused output connectors and avoid moisture!!
• Do not expose any component to excessive heat or fire!!
• Keep away from children!!
INTRODUCTION
Qpaq-X is a modular power system for the
Qflash-X type portable flash. A basic 200
Watt-second system consists of the
Command Module (PX) and a
Battery Module (PBl or PB2):
To disconnect any module,
press the buttons on
either side of the module.
To increase the power in 200 watt-second steps,
add Capacitor Modules (PC):
400 w-s
To charge the Battery Modules,
select one of the many chargers:
PR1US -USA/Canada
PR1E -Euro
PR1UK -U.K.
PR2 -Universal
PR3US -Fast Charger
-Requires Dual Charge
Module or AC Module
600 w-s
800 w-s
1
To charge Battery Modules
externally, add a
Dual Charge Module:
To charge and operate Qpaq
at the same time, or to charge
one Battery Module externally,
add an AC Charge Module:
Connect one or two Qflash-
X series flashes to the
power output connectors:
Select the power splitting with the
mode switch. The lights next to
the power connectors show the
power to each flash and when the
flash is "ready".
Select the recycle speed. Normal
speed provides more flashes per
charge; Ultra speed recycles
faster. The light is lit in Ultra mode.
2