Using the Self-timer
Use the self-timer to set a delay from the time the shutter button is pressed to
the time the image is shot.
1. Turn the power on, and set the digital camera to the capture mode.
2. Press the LEFT/SELF-TIMER button to change the self-timer mode. Each time
the LEFT/SELF-TIMER button is pressed the self-timer icon changes.
2 Seconds: The shutter release will delay for 2 seconds.
5 Seconds: The shutter release will delay for 5 seconds.
10 Seconds: The shutter release will delay for 10 seconds.
3. Press the SHUTTER button to take a picture.
4. After starting the Self-timer, the self-timer LED will flash until the picture is
taken.
Using the Flash
The flash is not only for taking pictures when there is insufficient light, but also
for when the subject is in shade or with backlight conditions. Pressing the
RIGHT/FLASH button to select the different flash modes. The flash will not
25