Using The Controls; Temperature Adjustment - Kitchen Aid KBFN502EBS Manual De Uso Y Cuidado

2. Pull the bottom out. Then, push the top grille straight up and
pull it straight out. Place the grille on a soft surface.
B
A. Top grille
B. Cabinet side trims
To Replace Top Grille:
1. Insert top grille hooks (located on the back of the top grille)
onto mounting bolts on the side trim.
2. Pull the grille down slightly and push the bottom in to lock it
into place.
Turn Power On or Off:
1. Remove top grille.
2. Press power switch to the On or Off position.
3. Replace top grille.
IMPORTANT: Be sure the power switch is set to the On position
after cleaning refrigerator.
A. Power switch

Using the Controls

IMPORTANT:
The Fridge control adjusts the temperature in the refrigerator
compartment. The Freezer control adjusts the temperature in
the freezer compartment.
Wait 24 hours after you turn on the refrigerator before you put
food into it. If you add food before the refrigerator has cooled
completely, your food may spoil.
NOTE: Adjusting the temperature controls to a lower (colder)
setting will not cool the compartments any faster.
If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
The recommended settings should be correct for normal
household usage. The controls are set correctly when milk or
juice is as cold as you like and when ice cream is firm.
The actual temperature may differ from the display when a
door is open for an extended period of time.
6
A B
Turning On Cooling and Viewing Set Points
The factory recommended set points are 0°F (-18°C) for the
freezer and 37°F (3°C) for the refrigerator
1. Press the FRIDGE or FREEZER touch pad.
NOTE: After the refrigerator is turned on, the Over
Temperature audio alarm and indicator light may activate
every 1¹⁄₂ hours until the refrigerator and freezer temperatures
are below 48°F (9°C) and 15°F (-9°C), respectively, or until the
alarm is turned off. To turn off the audio alarm and indicator
light, see "Alarm Reset."
Turning Off Cooling
1. Press the FRIDGE or FREEZER touch pad.
2. Press and hold the COOLING OFF touch pad for 3 seconds.
NOTE: To turn off the power completely, use the power ON/
OFF switch located behind the top grille. See "Power On/Off
A
Switch."
Viewing the Temperature in Degrees Celsius
1. Press °C touch pad. To display degrees Fahrenheit, press °F
touch pad.
NOTE: If the freezer temperature is below zero, the negative
sign next to the freezer display will light up. This is normal.
Adjusting Controls
NOTE: Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.
To Adjust Set Point Temperatures:
Press the FRIDGE or FREEZER touch pad, and then press the
Plus (+) or Minus (-) touch pad until the desired temperature is
reached.
Press the SAVE touch pad to program the desired
temperature.
NOTE: The set point range for the freezer is -5°F to 3°F
(-21°C to -16°C). The set point range for the refrigerator is 34°F to
42°F (1°C to 6°C).
CONDITION/REASON:
REFRIGERATOR too cold
Not set correctly for conditions
REFRIGERATOR too warm
High use or room very warm
FREEZER too cold
Not set correctly for conditions
FREEZER too warm/too little
ice
High use or heavy ice use
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR Control 1°
higher
REFRIGERATOR Control 1°
lower
FREEZER Control 1° higher
FREEZER Control 1° lower