Repeat Play - Teac PD-D2500 Manual Del Usuario

Intro Check Disc Play
∑ Checking the contents of all
discs
1. Press the INTRO (or INTRO CHECK)
button.
The INTRO indicator lights.
2. Press the PLAY ( ∏ ) button.
The first 10 seconds of each track is
played back on all discs.
O If the INTRO (or INTRO CHECK) button is
pressed during intro check disc play, the
intro check mode will end and normal
disc play will continue from that point.
O If you press the INTRO (or INTRO
CHECK) button during normal play, intro
check disc play begins with the next
track.
If you perform the same action while a
track has played for less than 10
seconds, the intro check disc play starts
from that track.
O When the INTRO (or INTRO CHECK)
button is pressed during STOP mode,
the first track on the disc number shown
in the DISC NO. display will be played for
about 10 seconds, then the second track
on the disc will be played for about 10
seconds. Disc play will continue in this
way until all the tracks on all the discs
have been scanned.
∑ Selecting a disc for intro
checking
1. Press the INTRO (or INTRO CHECK)
button.
2. Select a disc number using the DISC
NO.(1~5) buttons.
3. Press the PLAY ( ∏ ) button.
O In order to designate a track number on
the disc, press the DISC NO.(1~5) button
first, and then press the TRACK NO.
(1~9, 0) button.
O Upon finishing the entire intro check
disc play, the mode display changes to
stop.
∑ Checking the contents of
programmed tracks
1. Program the tracks.
The PROGRAM indicator lights.
2. Press the INTRO (or INTRO CHECK)
button.
The INTRO indicator lights.
3. Press the PLAY ( ∏ ) button.
O Upon finishing the entire programmed
intro check disc play, the mode display
changes to stop for programmed play.
O Pressing the SHUFFLE button activates
intro check disc play at random within
the programmed tracks.
∑ Intro check time setting
1. Input the desired time by pressing
TRACK NO.(1~9, 0) buttons (1 to 99
seconds).
2. Press the INTRO (or INTRO CHECK)
button.
3. Press a DISC NO.(1~5) button.
O In order to designate a track number on
the disc, press a DISC NO.(1~5) button
first, and then press a TRACK NO.(1~9, 0)
button.
4. Press the PLAY ( ∏ ) button.

∑ Repeat play:

Shuffle programmed tracks
1. Program the tracks.
2. Press the SHUFFLE button.
3. Press the REPEAT button.
4. Press the PLAY ( ∏ ) button.
O Programmed tracks are played at
random repeatedly until the STOP ( ∑ )
button is pressed.
O Shuffle programmed tracks are played
in a different order during the second
run and all runs thereafter.
O During repeat shuffle programmed play,
if the SHUFFLE button is pressed, shuffle
programmed play is canceled and the
programmed tracks are
repeatedly in the programmed order.
∑ Repeat play: Intro check disc
play
1. Press the INTRO (or INTRO CHECK)
button.
2. Press the PLAY ( ∏ ) button.
3. Press the REPEAT button.
O Intro play is repeated for the tracks on
all discs.
O If the REPEAT button is pressed again,
intro play is repeated for the tracks
currently playing, and the REPEAT ONE
indicator lights.
∑ Repeat play: Intro check disc
play of shuffle programmed
tracks
1. Program the tracks.
2. Press the INTRO (or INTRO CHECK)
button.
3. Press the SHUFFLE button.
4. Press the PLAY ( ∏ ) button.
5. Press the REPEAT button.
O Shuffle programmed intro scan disc play
is repeated until the STOP ( ∑ ) button is
pressed.
– 9 –
Specifications
System: Digital compact disc changer
Pickup: 3-beam laser
Error correction: CIRC
Sampling frequency: 44.1 kHz
D/A converter: Dual 1-bit linear
Digital filter: 8-times oversampling
Frequency response: 20 — 18,000 Hz ± 1 dB
Total harmonic distortion:
Less than 0.02% (1 kHz)
S/N ratio: More than 96dB
Wow and flutter: Below measurable limit
Channel separation:
More than 85 dB (1 kHz)
Output voltage max.: 1.8 Vrms
GENERAL
Power requirements:
120 VAC, 60 Hz
(U.S.A./CANADA model),
230 VAC, 50 Hz (UK/Europe model),
240 VAC, 50 Hz (Australia model)
Power consumption: 12 watts
Dimensions (W x H x D): 435 x 115 x 390 mm
Weight: 6.2 kg
O Improvements may result in specifi-
cation or feature changes without
notice.
O Illustrations may differ slightly from
production models.
played