Publicidad
Step 11
Push two CROSS-SLOTTED DOWELS (24F) into the LONG BRACE (K)
å
as shown.
NOTE: The threads in the DOWEL should be pointed toward the hole in
å
the edge of the LONG BRACE.
First, fi ll the holes in the ends of the LONG BRACE (K) 1/4 to 1/2 full
å
with GLUE (54M). Then, insert the WOOD DOWELS (15F) into the holes.
Wipe away the excess GLUE.
Now, fi ll the hole in the LEFT BRACE (G) 1/4 to 1/2 full with GLUE.
å
Fasten the LONG BRACE (K) to the LEFT BRACE (G). Use one BLACK
å
2-3/8" FLAT HEAD BOLT (103S).
NOTE: The BOLT will thread into the DOWEL in the LONG BRACE.
å
NOTE: Be sure the WOOD DOWEL in the LONG BRACE inserts into the
å
LEFT BRACE. Wipe away the excess GLUE.
The long slot should face up
and be parallel to the long
edges of the SIDE SKIRTS.
24F
K
Page 16
15F
54M
t e d
s l o t
i t h
e w
f a c
S u r
K
BLACK 2-3/8" FLAT HEAD BOLT
(1 used for the LONG BRACE)
425015
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
G
e l s
d o w
103S
www.sauder.com/service
Publicidad
