Bestway Hydro-Force Kick Back Manual Del Usuario página 5

• ATTENTION! NO PROTECTION AGAINST DROWNING!
• SWIMMERS ONLY!
• Fully inflate all air chambers.
• This is not a life-saving device. Do not leave children
unattended while device is in use. Competent adult supervision
should always be provided.
• Keep away from flames and fires.
• Before every use, carefully inspect all product components to
ensure everything is in good condition and tightly secured.
Please stop and make repairs if you find any damage.
• Be careful when placing product on the ground. Sharp and
rough objects such as rocks, cement, shells, glass, etc. may
puncture the product.
• Don't leave the product exposed to sun for long periods of time.
Otherwise, the product material is likely to stretch andor change
shape. This can cause irreparable damage.
• Never leave in or near the water when not in use.
• Never use in stormy weather, or in rough conditions. Seek
shelter when lightning is present, DO NOT stay on the product.
• Distribute persons or loads evenly. Uneven distribution of
persons or loads may result in tipping and drowning.
• Use in calm shallow waters near the shoreline.
• Never allow diving to or from this product.
• Do not use for navigational purposes such as a boat. This is not
a boat.
• Do not tow product with a boat.
• Know and follow local water safety rules and regulations.
SAVE THESE INSTRUCTIONS
PARTS REFERENCE
A (Island)
2.77m x 2.62m / 9'1" x 8'7"
C (Anchor bag)
The picture is for reference only, not to scale.
Ref Description
A Island
B Rope
C Anchor bag
D Repair patch
Note: Do not over inflate. Do not use an air compressor or
compressed air.
Note: Never stand on or rest objectson the product during
inflation.
Note: Always check product for leaks before use.
WARNING
B (Rope)
D (Repair patch)
Quantity Spare Part No.
1
4 F2A002
1
1 F1B176
ASSEMBLY
1. Take the island and accessories out with care. Spread the
island out.
2. Open the valves and inflate (the air pump is not included).
Close the valves after inflation and press them into the air
chambers.
3. Thread the rope through the grommets around the outside of
the island one by one.
4. Connect the climb cushion to the island using the ropes and
knot the ropes to make the climb cushion secure.
5. Fill the anchor bag with rocks or sand to weigh it down. Hang
the anchor bag to make the island more stable.
DISASSEMBLY
Pull out the stoppers of the valves to deflate.
REPAIR
1. If the product is damaged, use the provided repair patch.
2. Clean the area to be repaired.
3. Carefully peel the patch and remove it from the backing.
4. Press patch over the area to be repaired.
5. Wait 30 minutes before inflation.
CLEANING AND STORING
1. After deflation, use a damp cloth to gently clean all surfaces.
Note: Never use solvents or other chemicals that may
damage the product.
2. Store in a cool, dry place, out of reach of children.
3. Check the product for damage at the beginning of each
season and at regular intervals when in use.
/
/
5