Putting Into Operation; Periodical Maintenance - IARP MIRA ONE P Instrucciones De Empleo Y Manutención

PUTTING INTO OPERATION

Check that the voltage on the identification plate
is the same as that of the network.
THE ELECTRICAL SUPPLY LINE TO
WHICH THE REFRIGERATOR WILL HAVE TO
BE CONNECTED IS TO BE PROTECTED BY
A VERY SENSITIVE DIFFERENTIAL SWITCH
(Rc=16A,Dc=30mA); IT IS ALSO TO BE LINKED TO
THE GENERAL EARTHING PLANT.
The manufacturer disclaims all responsability for any damage
to people or things due to incorrect observance of this rule.
Earthing is necessary and compulsory by law.
Absolutely never use reduction units, patch cords,
adapters or multiple socket outlets to connect the counter.
DIRECTLY connect the equipment to the mains.

PERIODICAL MAINTENANCE

Any further adjustments on the refrigerator necessarily
require the electric plug to be removed.
Check periodically the supply cable in order to detect
any damage.
If the power supply cable is damaged, don't use the
equipment and don't try to repair it: to prevent any risk,
it must be replaced by the manufacturer, by a member of
the after-sales service staff, or anyway by a person having
similar qualifications.
In any case, none of the protective elements (the grill, the
carter) must be removed by non qualified staff.
Absolutely avoid using the refrigerator without such
protection.
The replacement of led lamps must be carried out
only by an Authorized Service Center.
The lamps have to be replaced by identical lamps only.
For a good preservation of the cabinet's body a periodical cleaning is necessary.
EXTERNAL BODY: When necessary, the external body should be cleaned with a cloth and a neutral
soap and water solution.
STAINLESS STEEL SURFACES: Wash with warm water and mild detergent, rinse well and dry
with soft cloth. Avoid scouring pads etc. which will spoil the finish of the stainless steel.
SURFACES IN PLASTIC MATERIAL: Wash with warm water and mild detergent, rinse well and
dry with soft cloth; under no circumstances should alcohol, methylated spirits or solvents be used.
GLASS SURFACES: Only use products specifically designed for glass cleaning; It is not advisable
to use ordinary water which can leave a film of calcium on the surface of the glass.
Unplug
the unit
-9-