GENERAL INSTRUCTIONS Thank you for purchasing an HH Passive Full Range Inclosure. The Tessen series are professional specification cabinets designed to give exceptional dynamics, clarity and projection in all applications from clubs to large venues. In order to take full advantage of it and enjoy long and trouble-free performance, please read this owner's manual carefully, and keep it in a safe place for future reference.
CONSIGNES DE SÉCURITÉ IMPORTANTES ATTENTION: L'utilisation de tout appareil électrique doit être soumise aux précautions d'usage incluant: 1. Lisez ces instructions 2. Gardez ce manuel pour de futures références. 3. Prêtez attention aux messages de précautions de ce manuel. 4. Suivez ces instructions. 5.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD CUIDADO: Cuando use productos electrónicos, debe tomar precauciones básicas, incluyendo las siguientes: 1. Lea estas instrucciones. 2. Guarde estas instrucciones. 3. Haga caso de todos los consejos. 4. Siga todas las instrucciones. 5. No usar este aparato cerca del agua. 6.
INSTRUÇÕES DE SEGURANÇA AVISO: Ao usar produtos elétricos, adverte básica devem ser sempre seguidas, incluindo as seguintes: 1. Leia estas instruções. 2. Guarde estas instruções de segurança. 3. Preste atenção a todos os avisos. 4. Siga todas as instruções. 5. Não use este aparelho perto da água. 6.
CONTROL PANEL CONTROL PANEL TNP-1201,1501,2151 TNP-1201,1501,2151 INPUT INPUT LINK LINK BI-AMP BI-AMP ± 1 LF 8Ω ± 1 LF 8Ω REMOVE SPEAKER PANEL TO REMOVE SPEAKER PANEL TO ± 2 HF 8Ω ± 2 HF 8Ω CHANGE BETWEEN FULL CHANGE BETWEEN FULL RANGE &...
Página 8
SUSPENSION Tessen cabinets are fitted with M10 flying points for installation and suspended use. Tessen cabinets are fitted with M10 flying points for installation and suspended use. Note that suspension or 'flying' of cabinets should be performed only by properly qualified persons, in Note that suspension or 'flying' of cabinets should be performed only by properly qualified persons, in compliance with all local laws and using approved hardware.
Página 9
SETUP EXAMPLE 1 BI-AMP LEFT CHANNEL RIGHT CHANNEL INPUT LINK INPUT LINK BI-AMP BI-AMP ± 1 LF 8Ω ± 1 LF 8Ω REMOVE SPEAKER PANEL TO REMOVE SPEAKER PANEL TO ± 2 HF 8Ω ± 2 HF 8Ω CHANGE BETWEEN FULL CHANGE BETWEEN FULL RANGE &...
OPERATION MODE The Tessen passive cabinets are shipped in Full Range mode. To switch to Bi-Amp operation, please follow the steps below. INPUT LINK BI-AMP ± 1 LF 8Ω REMOVE SPEAKER PANEL TO ± 2 HF 8Ω CHANGE BETWEEN FULL RANGE &...
Página 12
CONTROL PANEL TNP-1800S 1: INPUT: A standard ‘Speakon’ compatible NL4 input connector which is connected directly to the onboard driver. 2: LINK: Connected in parallel with the Input connector allowing for additional cabinets to be added to the speaker chain. Please consider the drive capabilities of your amplifier (consult manufacturers technical information) and speaker input impedances (detailed on the Tessen panel) when connecting cabinets using the link feature.
Página 13
SUSPENSION Tessen cabinets are fitted with M10 flying points for installation and suspended use. Note that suspension or 'flying' of cabinets should be performed only by properly qualified persons, in compliance with all local laws and using approved hardware. If you are not qualified, leave it to somebody who is. Failure to do so could result in serious injury or death! The rigging or suspended mounting of these speakers can expose members of the public to serious health risks or even death.
Página 14
STACKING All speakers should be balanced and steady. If products are stacked, strap them together to improve stability. The fitted side tie down points can be used to improve safety in this instance. The top M20 pole mount can be used with standard M20 to 35mm distance poles to support top cabinets. Don't overextend poles/tripods ;...
Página 15
SETUP EXAMPLE 1 FULL RANGE CHANNEL INPUT LINK BI-AMP ± 1 LF 8Ω REMOVE SPEAKER PANEL TO ± 2 HF 8Ω CHANGE BETWEEN FULL LF CHANNEL RANGE & BI-AMP MODES FULL RANGE ± 1 IN 8Ω ± 2 N/A FULL RANGE LF AMPLIFIER HF AMPLIFIER LOW-PASS...
Página 16
Heavy gauge steel Grille Illuminating Logo 561x600x641 Unit dimensions (mm) (HWD) 34.8 Unit weight (Kg) Carton dimensions (mm) (HWD) 660x730x695 Packed weight (Kg) In the interest of continued development, HH reserves the right to amend product specification without prior notification. WWW.HHELECTRONICS.COM...
Página 17
hhelectronics hhelectronics Model number: hhelectronics Serial number: Place of purchase: Date of purchase: www.hhelectronics.com WWW.HHELECTRONICS.COM REVISION 2.00...