Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Toyota Camry 2002-2006
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8" Phillips screws
A
B
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • 10mm Socket wrench
METRA. The World's best kits.
Installation instructions for part 99-8231
(without NAV)
99-8231
C
metraonline.com
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
ISO DDIN radio provision ...................................... 3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness:
• 70-1761 • 70-8113
Antenna Adapter:
• Not required
D
CAUTION!
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
Table of Contents
Metra recommends disconnecting the negative bat -

Publicidad

loading

Resumen de contenidos para Metra 99-8231

  • Página 1 • A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws Antenna Adapter: • Not required CAUTION! Metra recommends disconnecting the negative bat - tery terminal before beginning any installation, unless the vehicle manufacturer recommends against so. Please check with your local Dealership for more information. All accessories, switches, climate controls panels, and especially air bag indicator lights must be con - nected before reconnecting the battery or cycling the ignition.
  • Página 2: Dash Disassembly

    99-8231 Dash Disassembly Toyota Camry 2002-2006 (without NAV) 1. Unclip and remove the climate control trim panel. (Figure A) 2. Unclip and remove the radio trim 101.9 panel including the climate control vents. (Figure B) 101.9 3. Remove (4) 10mm hex head screws securing the radio, and then unplug and remove the radio.
  • Página 3: Iso Din Radio Provision With Pocket

    Metra recommends using the 4. Slide the radio into the completed proper mating adapters from Metra assembly, and then secure using and/or AXXESS. the screws supplied with the radio.
  • Página 4: Important

    Installation instructions for part 99-8231 IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
  • Página 5: Herramientas Requeridas

    Instrucciones de instalación para la pieza 99-8231 Indice Toyota Camry 2002-2006 (sin NAV) 99-8231 Desmontaje tablero ..........2 Ensamble del kit CARACTERÍSTICAS DEL KIT – Provisión de radio ISO DIN con cavidad ....3 • ISO DIN radio provision with pocket –...
  • Página 6: Desmontaje Tablero

    99-8231 Desmontaje tablero Toyota Camry 2002-2006 (sin NAV) 1. Desenganche y quite el control de clima panel de moldura. (Figura A) 2. Desenganche y quite el panel de la 101.9 moldura del radio, incluyendo las respiraderos de control climático. (Figura B) 101.9...
  • Página 7: Provisión De Radio Iso Din Con Cavidad

    4. Deslice el radio en el ensamble en el tablero. Metra recomienda terminado y sujételo al ensamble que use adaptadores adecuados con los tornillos suministrados con de acoplamiento de Metra y/o de (Figura A) (Figura A) el radio. (Figura B) AXXESS.
  • Página 8: Importante

    Instrucciones de instalación para la pieza 99-8231 IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...