Descargar Imprimir esta página
Ocultar thumbs Ver también para 99-8233B:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Toyota Avalon 2011-2012
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted Matte Black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8" Phillips screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761
Antenna Adapter: • Not required
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • 10mm Socket wrench
METRA. The World's best kits.
Installation instructions for part 99-8233B
(without factory navigation)
99-8233B
C
D
metraonline.com
Table of Contents
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
ISO DDIN radio provision ...................................... 3
CAUTION!
Metra recommends disconnecting the negative bat -
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION

Publicidad

loading

Resumen de contenidos para Metra 99-8233B

  • Página 1 • A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws CAUTION! Metra recommends disconnecting the negative bat - tery terminal before beginning any installation, unless the vehicle manufacturer recommends against so. Please check with your local WIRING &...
  • Página 2: Dash Disassembly

    99-8233B Dash Disassembly 1. Unclip and remove the radio/ climate trim panel. (Figure A) 2. Remove (4) 10mm screws securing the radio/climate control assembly. (Figure B) 3. Remove (4) Phillips screws securing the climate control to the factory bracket assembly. (Figure C)
  • Página 3: Kit Assembly

    (Figure A) assembly using (4) #8 x 3/8” Phillips screws supplied. (Figure A) 3. Locate the factory wiring harness in the dash. Metra recommends 4. Secure the climate control to the completed assembly using the factory using the proper mating adapter hardware.
  • Página 4: Important

    Installation instructions for part 99-8233B IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
  • Página 5: Características Del Kit

    Instrucciones de instalación para la pieza 99-8233B Indice Toyota Avalon 2011-2012 (sin navegación de fábrica) Desmontaje tablero ..........2 99-8233B Ensamble del kit – Provisión de radio ISO DIN con cavidad ....3 – Provisión de radio ISO DDIN ......... 3 CARACTERÍSTICAS DEL KIT...
  • Página 6: Desmontaje Tablero

    99-8233B Desmontaje tablero 1. Desenganche y quite el panel de la radio/clima. (Figura A) 2. Quite los (4) tornillos 10mm que sujetan el ensamble del radio/ control de clima. (Figura B) 3. Quite los (4) tornillos Phillips que sujetan el control de clima al ensamble del soporte de fábrica.
  • Página 7: Ensamble Del Kit

    (Figura A) (Figura A) que use adaptadores adecuados de hardware de fábrica. (Figura A) acoplamiento de Metra y/o de AXXESS. 5. Localice el arnés de cableado de Vuelva a conectar la terminal negativa fábrica y el conector de la antena en de la batería y pruebe el radio para...
  • Página 8: Importante

    Instrucciones de instalación para la pieza 99-8233B IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...