Toshiba ССD Manual De Instrucciones página 22

Indoor unit cassette type
Tubings
Hook panel
Drainage
Swing Motor
Unit body
Unit body
Ceiling
Hook-bolt
Cross-screwdriver
panel
air out
Sponge
Fig.26
Fig.27
Relocate the Grill
1. Hang the grill to the panel, then connect cable swing motor and display to the corresponding
connectors from unit body.
2. Relocate the air-in grill in the procedure of reversed order.
Relocate the corner cover.
1. Fasten the rope of corner cover onto the screw of the corner cover. (Fig.28)
2. Press the cover into the panel slightly. (Fig.28)
Tap screw
Slide the four sliders
Fig.28
21