Mellerware ROBOT 800 Manual De Instrucciones página 2

Dear customer,
Thank you for choosing to purchase a Mellerware
brand product. Thanks to its technology, design and
operation and the fact that it exceeds the strictest
quality standards, a fully satisfactory use and long
product life can be assured.
800
1. Parts Description
1- Stick blender motor housing
2- Food chute
3- Blade holder
4- Food processor bowl
5- Whisk attachment
6- Stick blender shaft
7- Chopping attachment
8- Fine chopping blade
9- Slicing blade
10- Course grating blade
11- Measuring beaker
. Safety advice and warnings!
Read these instructions carefully before switching
on the appliance and keep them for future refer-
ence. Failure to follow and observe these instruc-
tions could lead to an accident. Clean all the parts
of the product that will be in contact with food, as
indicated in the cleaning section, before use.
2.1. Use or working environment:
85800_IM.indd 2
2.1.1. Keep the working area clean and well lit. Clut-
tered and dark areas invite accidents.
2.1.2. Use the appliance in a well ventilated area.
2.1.3. Do not place the appliance on hot surfaces,
such as cooking plates, gas burners, ovens or
similar items.
2.1.4. Keep children and bystanders away when
using this appliance.
1 2.1.5. Place the appliance on a horizontal, flat,
stable surface suitable for withstanding high
2
temperatures and away from other heat sources and
contact with water.
2.1.6. Keep the appliance away from flammable
3
material such as textiles, curtains, cardboard or
paper, etc.
4
2.1.7. Do not place flammable material near the
5
appliance.
6
2.1.8. Do not use the appliance in association with a
programmer, timer or other device that automatically
switches it on.
7
2.1.9. Do not use the appliance if the cable or plug
is damaged.
8
2.1.10. Ensure that the voltage indicated on the
9
10
rating label matches the mains power supply voltage
11
before plugging in the
appliance.
2.2.11. Connect the appliance to the mains power
supply with an earth socket withstanding a mini-
mum of 10
amperes.
2.1.12. The appliance's plug must fit into the mains
power supply socket properly. Do not alter the plug.
2.1.13. If using a multi plug check ratings carefully
as the current used by several appliances could eas-
ily exceed the rating of the multi plug.
2.1.14. If any of the appliance casings breaks, im-
mediately disconnect the appliance from the mains
power supply to prevent the possibility of an electric
shock.
2.1.15. Do not use the appliance if it has fallen on
the floor or if there are visible signs of damage.
2.1.16. Do not force the power cord. Never use the
power cord to lift up, carry or unplug the appliance.
2.1.17. Do not wrap the power cord around the
appliance.
2.1.18. Do not clip or crease the power cord.
2.1.19. Do not allow the power cord to hang or
to come into contact with the hot surfaces of the
appliance.
2.1.20. Check the state of the power cord. Damaged
or tangled cables increase the risk of electric shock.
2017/12/18 11:05:58 AM