AUX IN JACK (REAR OF UNIT)
Insert one end of the audio cable into the AUX/LINE OUT jack on your
external audio unit and the other end into the AUX IN jack on the rear of this
unit. To listen to the external audio unit, turn this unit on using the Power
button; the Power indicator will light. Turn on the external unit as well. The
external audio unit's output sound will be heard through this unit's speakers. If
you wish to listen to the iPod in the iPod compartment, disconnect the
external unit with the audio cable from this unit.
NOTE: Once the external unit is connected, this unit will change to AUX IN
mode automatically. Then, if you disconnect the external unit from the AUX IN
jack, this unit will revert back to iPod mode.
VIDEO OUT JACK (REAR OF UNIT)
If you are using an iPod that has photo/video capability, and your TV has a
standard video input, you can connect the unit to the external TV with the included
cable. You will then be able to view the photos/videos from the iPod on your
external TV.
NOTES:
•
Set the TV's TV/VIDEO mode or switch to the VIDEO setting.
•
When connecting the unit, refer to the owner's manual for the TV, as well as
this manual.
•
When connecting the unit, make sure the power is off and both units are
unplugged before making any connections.
•
Make sure to go into the Settings menu of your iPod and set the TV Out
setting to ON. Otherwise, you may not be able to view the videos/photos on
your external TV.
•
The TV will have Video signal only, because the sound will come from this
unit. Also remember to set the TV signal to NTSC for US.
OPTIONAL CONNECTIONS
7
TV