jcm-tech MINIMAN+DCS Manual De Instrucciones página 17

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

This function only transfers codes, and maintains the format of the cards.
If the destination card is not blank and empty, the contents will be lost.
If the capacity of the destination card is smaller than the content
that you wish to copy on it, the programmer will not allow the
operation and will issue a warning on the following screen:
4.8
DELETE CODE FUNCTION
Simultaneously press the keys
message will appear:
Then, insert the receiver memory cards in the corresponding connector and key the code
number you wish to delete. As you press the corresponding
keys, the display will visualise the numbers. For example, if
you wish to delete the code "123456", it will show:
Once the code has been keyed, press
the momentary appearance of the confirmation screen will
indicate that the operation has been carried out correctly.
You will automatically return to the previous menu and the code of the receiver memory
card will have been deleted. If you wish to delete more codes, you must repeat the
operation as many times as necessary.
If the code that has been keyed does not exist in the memory,
you will be warned with the following message:
4.9
CHANGE PASSWORD FUNCTION
To change or inhibit the password of the portable programmer, proceed as follows:
From "(Choose function)", simultaneously press the keys
screen will appear:
By pressing the key
screen will validate the inhibition of the password. From this moment, when you turn on
the portable programme again, you will not be asked for it.
By pressing the key
change it. By pressing the key
appearance of the confirmation screen will validate that the
same password stands.
When you press the key
new six-figure number. While you are entering them, the dis-
play will visualise the sign "*".
Once all of the figures have been entered, press the key
a new screen will make you repeat the number for security reasons.
and
, and the following
. A short beep and
, a short beep and the momentary appearance of the confirmation
, , another screen will appear which will ask you if you wish to
, a short beep and the
, you will be asked to enter the
17
and
, and the following
and

Publicidad

Tabla de contenido
loading

Productos relacionados para jcm-tech MINIMAN+DCS

Tabla de contenido