ZAMST FILMISTA Instrucciones De Uso página 2

How to apply
• Before attaching this product, carefully read through the "Precautions for use - Be sure to read this". Then follow the steps provided for proper
attachment.
• The attachment steps below use the right wrist for reference. The same principles apply to the left wrist as well.
1.
Remove all of the hook-and-loop fasteners of the main body of the product, and check over the product's top/bottom and
inside/outside. Check the positioning of the product. Strap A will be positioned closer to the hand and the logo mark faces
the front side.
2.
Slide the adjustment belt B, and pass the hand through the product from the side with the logo mark.
3.
Make sure the belt loop C is in line with the middle finger, adjust the strap A, and close the hook-and-loop fastener D. With
the hand open, pull the strap A to the little finger side (in the case of the left hand, thumb side), make sure it fits tightly on
the wrist, then close the hook-and-loop fastener D. Be careful not to turn the product at the time.
4.
Adjust the strap E and close the hook-and-loop fastener F. Adjust the strap E so as not wrinkle the product, and close the
hook-and-loop fastener F.
5.
Make sure the main body or straps of the product are not loose or improperly attached. If anything looks unusual, start
over from the beginning to re-attach the product.
Materials:
Fiber: Elastane, Nylon, Polyester
Non-fiber: Polyurethane
* Note: When disposing of this product, be sure to follow all disposal ordinances
and regulations as specified by the local government.
B
A
C
E
A
F
Disclaimer:
* Product specifications, external view, etc. may be changed without prior notice
for improvement purposes.
* All possible measures were taken to ensure product quality, but if a defect, etc. is
found, please contact us.
D
EN