Feiss OL14504 Guia De Inicio Rapido

Installation Instructions for
Lindbergh Outdoor Post
Outdoor
G ENERAL RODUCT NFORMATION P
This product is safety listed for wet locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a
additional information.
This instruction shows a typical installation.
1A
Connect the fixture to a suitable ground in accordance to local electrical codes.
1
Connect the white fixture wire to the neutral power line wire with a wire nut.
2
Connect the black fixture wire to the hot power line wire with a wire nut.
3
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
4
Install the candle followers by placing them on top of the candle tubes.
5
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage information.
6
Insert the glass panels through the bottom of the fixture and into the brackets at the top of the fixture, then secure them in
7
place using the clips.
Install the frame onto the fixture and secure them together using the frame screws.
8
I :
LED dimmer. Consult lamp manufacturer for
FRAME
GLASS PANEL
LAMP
CANDLE FOLLOWER
8
POST SCREW
POST
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
7
BRACKET
7
6
5
FIXTURE
FRAME SCREW
4
4
3 2
1
OL14504
CAUTION RISK OF FIRE -
CLIP
OL14504
1.0