Panasonic KX-NCPS01 Manual De Instrucciones página 4

KX-TDE100/KX-TDE200/KX-TDE600
3. Turn on the power to the PBX.
4. While the RUN indicator is flashing, slide the System Initialise Switch
back to the "NORMAL" position.
When the PBX is already installed (with the SD Memory Card
B.
included with the PBX installed)
When there are existing PBX system files (programme files, data files and
activation key files) on the SD Memory Card included with the PBX, it is
possible to copy the files to the SD Memory Card for VoIP Encryption using
the Maintenance Console. This allows you to keep the same settings as
before.
Note
It is assumed that you have already backed up the setting files of the
current SD Memory Card on the PC using the Maintenance Console.
1. Turn off the power to the PBX.
2. Remove the current SD Memory Card from the SD Memory Card slot of
the IPCMPR/IPCEMPR card.
3. Install the SD Memory Card for VoIP Encryption in the SD Memory Card
slot of the IPCMPR/IPCEMPR card.
KX-NCP500/KX-NCP1000
4
Reset Button
RESET
SYSTEM
INITIALIZE
System Initialise Switch
NORMAL