List Of Device Functions And Components; Digital Display; Changing From °C To °F; Waxpool Duo Dip Tanks - bredent Waxpool duo Manual De Funcionamiento Y Mantenimiento

5.1 List of device functions and components

1a, 1b, 1c
Start button
2, 4 and 6 Temperature reduction
3, 5 and 7 Temperature increase
8 Boost button
9, 10 and 11 Indicator light
12 LED display
13 and 14 Dip tanks
15 Connection socket for wax knife
16 Connection for mains cable

5.2 Digital display

The digital display always shows the value of the working part that is activated at that moment. If the
indicator light is flashing, the corresponding working part is heating up; if the light is steady, the set
temperature has been reached.
5.3 Changing from °C to °F
The unit currently set (°C or °F) is displayed during the self-test and remains visible for approximately
5 seconds. The unit can be changed by pressing the button combination 2 and 5 for 5 seconds.

5.4 Waxpool duo dip tanks

Fill the dip tanks (13 and 14) of the Waxpool duo until they are 2/3 full of wax.
The keypads with the border are supplied for heated tanks. Press the „I" (1a and 1b) button for one second in
order to commence the dip tank heating process; the last setting is displayed, the indicator light flashes. The
temperature indicator on the display goes out after 3 seconds. Set the desired temperature using the „-"
(2 and 4) and „+" (3 and 5) buttons. Once the temperature has been reached, the indicator light remains on
constantly.
The dip tanks can be heated up to 120°C (248°F); simply press and hold the „+" button. In order to lower the
temperature, simply press and hold the „-" button.
bredent GmbH & Co. KG · Weissenhorner Str. 2 · 89250 Senden · Germany · T: +49 7309 872-22 · F: +49 7309 872-24
www.bredent.com · @: info@bredent.com
13