Electric Wax Knife; Cleaning And Maintenance; Cleaning; Maintenance - bredent Waxpool duo Manual De Funcionamiento Y Mantenimiento

5.5 Electric wax knife

Insert the cable of the electric wax knife into the socket (15) intended for this purpose at the side. Start the
wax knife heating process by pressing and holding the „I" (1c) button for one second; the value that was last
set will be displayed. A temperature indicator is not present here, just a value of 0 to 100. The value 100
corresponds with a temperature of approx. 240°C, depending on the blade thickness. Set the desired tempera-
ture using the „-" and „+" (6 and 7) buttons. If the highest possible temperature has not been set, the final
temperature can be set by pressing the „" button (boost button, 8). This maintains the temperature for
20 seconds and then automatically sets it back to the last value.

6. Cleaning and maintenance

6.1 Maintenance

Only clean the outside of the device using a lightly dampened cloth with the mains plug unplugged. Wipe
any overflowing wax and the dip tanks with a cotton cloth. The lids of the dip tanks can be removed and
cleaned when in an open position. Do not use any cleaning products containing solvents!
6.2 Maintenance
The device is maintenance-free for the customer.

7. Troubleshooting

Error
Device does not work/start!
LED display is not lit!
Keys of control panel
without function
„E1"
„E2" and „E3"
„E4"

8. Declarations of conformity

bredent GmbH & Co.KG, Weissenhorner Str. 2, 89250 Senden, Germany, hereby declares that the Waxpool
duo has been developed in accordance with the relevant provisions, European directives and harmonised
standards in view of the design and construction of the product in the form brought to the market by us.
The declaration of conformity can be requested if required.
14
Cause
Mains data and/or
connections,
incorrect parameters
Defective power cord -
cable broken,
loose contact
Defective contact
Overcurrent
Short circuit or open line
Soll-Temperatur wurde
nicht rechtzeichtig errreicht
bredent GmbH & Co. KG · Weissenhorner Str. 2 · 89250 Senden · Germany · T: +49 7309 872-22 · F: +49 7309 872-24
www.bredent.com · @: info@bredent.com
Elimination of error
- Compare data with type plate
- Plug in power plug
- Set start key to „l"
Replace power cord
Contact bredent service or authorized
dealer and have the keypad replaced
- Send in the device.
The handpiece needs to be exchanged.
Contact service of bredent or authorized
dealer and return the device for testing.
Mit dem Service von bredent oder auto-
risierten Händler in Verbindung setzen
und Gerät zur Prüfung einschicken.