Care Instructions - geberit 550.053.00.1 Manual De Instrucciones

EN

Care instructions

You have selected a product with a high-grade surface. Please follow the care instructions below.
The manufacturer does not assume any liability for product damage that arises as a result of incorrect care
and handling.
Intended use
The product is exclusively intended for the purposes of personal hygiene and washing with
water and standard hygiene products.
The product can be installed with various accessories. When installing the product,
observe the relevant instructions from the manufacturer.
General information
• Make sure that an efficient source of ventilation and an appropriate room temperature are present in your
bathroom.
• Protect the surface from bleaching due to extreme light and sun exposure.
Care instructions for shower trays and bathtubs
Pay attention to the following when cleaning shower trays and bathtubs:
• Never use cleaning agents that contain chlorine or that are acidic or corrosive.
• Never use cleaning agents that are abrasive or may scratch the surface.
• Never use sharp or pointed objects when cleaning.
• Use mild liquid cleaning agents and water.
• Use a soft, lint-free cloth or a non-scraping sponge.
• Rinse the shower tray or bathtub with water after every use.
• Remove any substances containing solvents immediately.
Cleaning surfaces
Exposure to splash water, moisture or residue from hygiene products causes the surface to pose an
increased slipping hazard. These substances must therefore be removed immediately.
1
Clean the surfaces. Please follow the corresponding care instructions.
2
Dry the surfaces with a soft, lint-free cloth.
36028800734740491-1 © 10-2018
967.781.00.0 (03)
3