Care instructions
You have selected a product with a high-grade surface. Please follow the care instructions below.
The manufacturer does not assume any liability for product damage that arises as a result of incorrect care
and handling.
Intended use
The product is exclusively intended to serve as a spray shield and to prevent excessive
steam in connection with closed showers.
General information
The design of the shower is not automatically barrier-free. Please bear this in mind during use.
• Make sure that an efficient source of ventilation and an appropriate room temperature are present in your
bathroom.
• If necessary, check that all moving parts are sufficiently lubricated.
• Defective or damaged parts must be replaced.
Care instructions for shower enclosures
Please note the following when cleaning shower enclosures:
• Never use cleaning agents that contain chlorine or acid or that are corrosive.
• Never use cleaning agents that are abrasive or may scratch the surface.
• Never use sharp or pointed objects when cleaning.
• Use mild liquid cleaning agents and water.
• Use a soft, lint-free cloth or a non-scratchi.ng sponge.
• Remove any substances containing solvents immediately.
Care instructions for glass
Please note the following when cleaning glass:
• Clean the shower enclosure with a glass wiper or a soft, lint-free cloth after every use.
• Use a microfibre cloth to clean satinised glass.
• use a glass cleaner.
• Remove drops from the edges of glass surfaces immediately.
Cleaning surfaces
1
Clean the surfaces. Please follow the
corresponding care instructions.
2
Dry the surfaces with a soft, lint-free cloth.
6479461003-1 © 06-2019
969.539.00.0(00)
EN
5